Cleaner with external motor: TANKO-JX series
The TANKO-JX series combines strong cleaning power with very economic use of the cleaning medium. The electric motor means that no cleaning medium is needed for driving the rotation. This allows the rotation and the speed of rotation to be easily adjusted to suit the cleaning requirements. The nozzle geometry determines the cleaning medium throughput, the range of the system and thus the possible cleaning power. These system allow the optimum cleaning force to be applied to the surface to be cleaned. The 360° spray pattern cleaning is based on 2 nozzles.
Technical Data
TANKO-JX70
| Spray angle | 360° orbital |
| Material | 1.4571 (316Ti), PTFE, PEEK, EPDM, iglidur® A500 |
| Operating pressure | Cleaning medium: 2 - 20 bar / 29 - 290 psi |
| Volume flow rate | 0.2 - 2.5 m³/h / 3.3 - 41.7 l/min / 1 - 11 gpm (US) |
| Cleaning radius | max. max. 2,1 m / 6,9 ft |
| Wetting radius | max. 4,3 m / 14,1 ft |
| Bearings | Ball bearing, plain bearing |
| Number of nozzles | 2, optional: 1; 3 or 4 |
| Nozzle bore | 1 - 4 mm, depending on expected cleaning power |
The technical data of the ATEX units can differ from the standard units and this data is provided in the respective operating and installation instructions.
TANKO-JX75
| Spray angle | 360° orbital |
| Material | 1.4571 (316Ti), PTFE,PEEK, EPDM, iglidur® A500 |
| Operating pressure | Cleaning medium: 2 - 20 bar / 29 - 290 psi |
| Volume flow rate | 0.6 - 7.2 m³/h / 10 - 120 l/min / 3 - 32 gpm (US) |
| Cleaning radius | max. 5 m / 16.4 ft |
| Wetting radius | max. 6 m / 19.7 ft |
| Bearings | Ball bearing, plain bearing |
| Number of nozzles | 2, optional: 1; 3 or 4 |
| Nozzle bore | 2 - 6 mm, depending on expected cleaning power |
The technical data of the ATEX units can differ from the standard units and this data is provided in the respective operating and installation instructions.
Technical Document
No related documents.
Video
No related videos.