Vario Sampling Valve
The AWH Vario version is a sampling valve that can take product samples in two ways. Firstly, in the conventional way using the sampling tube; in addition, by means of a cannula, which is pushed through the membrane to take samples via a syringe or tube. The multiple-use membrane automatically closes when the cannula is withdrawn. Contamination from outside is thus reduced to a minimum.
Technical Data
| Material | contact with product: 1.4404 (316L) |
| Seal | Membran: EPDM, FKM and Silicone |
| Surface | product-affected: Ra ≤ 0,8 µm |
| Operating pressure | max. 4 bar / 58 psi |
| Sampling with cannula | max. 2 bar / 29 psi (Please read carefully the chapter "Sampling by cannula" in the operating instructions.) |
| Max. operating temperature | max. 80°C / 176°F; CIP cleaning up to 90°C / 194°F max. unswitched, short-term 30 min.; SIP cleaning up to 135°C / 275°F max. unswitched, short-term 30 min. |
| Product sampling | Pipe DN8 (10 x 1 mm), other on request |
| Connections | Welding version for pipe DN15 (19 x 1.5 mm) |
Tài liệu kỹ thuật
Không tồn tại tài liệu liên quan.
Video liên quan
Không tồn tại video liên quan.